|
 |
|
| Ranger 305G |
300 Amp DC Gasoline Engine Driven Welder
K1726-3 Ranger 305 G Kohler
|
The Ranger 305 G is a powerful stick, TIG, wire and pipe welding engine driven welder that is ready for all day, everyday performance. Rugged and dependable, the Ranger 305 G is built with a totally enclosed case for maximum protection; Lincoln's Chopper Technology™ for an arc operators appreciate; and a 12 gallon fuel tank that will last you through the entire day. Lincoln's Ranger 305 G ... it's ready for a workout. |
| Advantage Lincoln |
- Gasoline Engine-Driven Welder - A powerful 300 amp DC CC/CV gasoline engine- driven welder. All rated outputs at 100% duty cycle 104°F (40°C). - Only compact gasoline welder in North America rated at 29V for 300 amps of stick welding.
- Multi-Process Welding - Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored- wire, MIG (CO2 and blended gas) and arc gouging.
- Digital Weld Meters - Digital weld meters for amps and volts make it easy to precisely pre-set your procedures and monitor actual welding output.
- Superior Arc Performance - Lincoln’s Chopper Technology provides easy starts, a smooth arc, low spatter and excellent bead appearance.
- Plenty of AC Generator Power - A portable powerhouse – delivers 10,000 peak (9,500 continuous) watts of 120V/240V AC generator power. Enough power to run lights, tools, and weld at the same time!
- Skewed Rotor Design - Skewed rotor design provides AC power suitable for operating Lincoln Pro-Cut® plasma cutters and inverter power sources. Lincoln was first in the welding industry with this feature.
|
| Physical Specifications |
Weight:510 lbs. (231 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073 |
|
|
 |
|
| Processes |
Stick TIG MIG Flux-Cored Gouging |
| Recommended General Options |
| K802N |
Power Plug Kit |
| K802R |
Power Plug Kit |
| K1690-1 |
GFCI Receptacle Kit |
| K1898-1 |
Spark Arrester Kit |
| K886-2 |
Canvas Cover |
| K1737-1 |
All Terrain Undercarriage |
| K1770-1 |
Factory Undercarriage |
| K1745-1 |
Gas Cylinder Holder |
| K1739-1 |
Cable Carrier Kit |
| K1788-1 |
Roll Cage |
| K957-1 |
Small Two-Wheel Welder Trailer |
| K958-1 |
Two Inch Ball Hitch |
| K958-2 |
Lunette Eye Hitch |
| K959-2 |
Fender and Light Kit |
| K965-1 |
Cable Storage Rack |
|
| Recommended Stick Options |
| K704 |
Accessory Kit - 400 Amp |
| K857 |
Remote Output Control |
| K857-1 |
Remote Output Control |
|
| Recommended TIG Options |
| K870 |
Foot Amptrol |
| K963-3 |
Hand Amptrol |
| KP509 |
Parts Kit |
|
| Recommended Wire Feeder Options |
| K449 |
LN-25 w/Contactor and Gas Solenoid |
| K126-2 |
350A FCAW-SS 15 ft 062-332 |
| KP653-3/32 |
Drive Roll Kit - .068-3/32" (1.7-2.4mm) Cored Wire |
| K1802-1 |
Magnum 300 Gun Package 15 ft 035-045 |
| KP653-035S |
Drive Roll Kit - .035" (0.9mm) Solid Wire |
| K444-2 |
14 Pin Remote Voltage Control Kit |
|
| Recommended Spool Gun Options |
| K487-25 |
Magnum SG Spool Gun, Air-Cooled, 25 ft. |
| K488 |
Magnum SG Control Module |
| K691-10 |
Control Module Input Cable – 14-pin MS-type and Lug |
|
|
Welding Specifications
| Rated CC AC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
| 305/29/100% |
305/29/100% |
20-305A DC
40-300A Pipe
20-250A TIG |
Engine Specifications
| Type of Engine |
Cylinders |
HP & Speed (rpm) |
Generator Output |
Fuel Type |
| Kohler OHV Command CH22 |
3 |
22@3600 |
10000 watts peak
9500 watts continuous |
Gas |
|
|
|
|
 |
 |
 |
 |
| ©1999-2008 The Lincoln Electric Company, China. |
|
|
Products
